The OMS Closed Bottom SMB is a closed bottom 3.3 foot (1 meter) surface marker made of high visibility yellow or orange airtight nylon. Inflated orally or by use of BC low pressure inflator hose. “No-Lock” Inflator keeps BC hose from locking on Dump/overpressure valve with manual pull cord Nylon loop to aid in stowing […]
Forged out of stainless steal primarily used to connect a metal backplate to a multitude of our items such as an IQ backpack, all of our BC wings, our back pads, and Single Tank Adapters(STA) and more . Book Screws can also be used to mount inflation systems to the back plate. They fit a […]
This OMS 6 foot / 1.8 meter SMB is designed with an open bottom allowing the diver to inflate it using the second stage of a regulator or other methods. This SMB is a standard piece of gear for divers performing drift or decompression dives. Features: Easily inflated at depth Extreme visibility Maximum size available in […]
This closed bottom 3.3 foot (1 meter) surface marker is made of high visibility yellow or orange airtight nylon. Inflated orally or by use of BC low pressure inflator hose. Features: “NoLock” Inflator keeps BC hose from locking on Dump/overpressure valve with manual pull cord Nylon loop to aid in stowing when deflated Stainless Steel […]
Forged out of stainless steel primarily used to connect a metal backplate to a multitude of our items such as an IQ backpack, all of our BC wings, our back pads, and Single Tank Adapters(STA) and more . Book Screws can also be used to mount inflation systems to the back plate. They fit a […]
Donut style configuration Inflator located left side Power inflator hose included Interior z zipper backing Dump valve left side Light weight ideal for traveling diver 1000 denier nylon outer bag Interior urethane backing protects against abrasions and punctures Inner Bladder Polyurethane material, ultrasonically welded fittings and seams Low Pressure (LP) inflation hose included 27 lbs. […]
OMS Stainless Steel backplate truly shines thanks to our superior de-burring process which eliminates backplate sharp edges, and prevents abrasion and cuts to webbing and BC’s. Our Stainless steel plate has a hard coat anodized surface to prevent oxidation and now incorporates additional slots to mount cam bands for single cylinder configuration. Plate has 22 holes […]
OMS’ superior de-burring process eliminates back plate sharp edges, and prevents abrasion and cuts to webbing and BC’s. The Aluminum Back Plate weighs only 1.75 lbs (794 g) and include the following slots: 1″ and 2″ (2.54cm and 5.1cm) width crotch strap, (2) cam band, and a bottom slot to accommodate band bolts that are […]